Notting Hill Painters & Decorators

Joinery & painted details

A painted door in Notting Hill is seen close up and used every day. Its panels, edges, frame and fittings need to be considered together, with the same care given to sash windows, shutters and fitted cabinetry.

Joinery and cabinet painting is also described by cabinet and joinery painters in Holland Park. Sash windows in the same kind of brief are covered by sash window painters in Kensington.

Count the elements, then describe them

A list of doors or windows is useful only when their size, construction and condition are understood. Show both faces where both are included. For wardrobes and cupboards, identify the interiors, shelves, exposed ends and door edges separately. Note any fittings to retain and any parts that stick or need adjustment.

Set the limits of preparation

Close photographs should show the profile of mouldings and the thickness of existing coatings. Discuss any proposed stripping before it is included. In a listed building, changes to internal decorative features can fall within consent requirements, so establish the position before altering historic joinery or its detail.

Sources: RBKC: listed buildings explained

Bring the finish to the junction

Record how painted surfaces meet glass, stone, flooring and unpainted timber. A small sample should show the intended sheen as well as colour. Keep the exact product references, including preparation coats where specified. This helps define an edge or return that might otherwise be missed in a general description of the room.

Allow the joinery to remain useful

Identify the doors and cupboards needed during the work and agree how the sequence will accommodate them. Clarify responsibility for removing and refitting hardware where necessary. Ask for the relevant drying and curing guidance for the chosen product. Send photographs with the element list so the painting scope can be separated from repairs or alterations.

Arrises, door edges and the faces a hand meets

Painted joinery is judged at arm's length. A door brief should say whether one face or both are included, and should show the panels, the moulded edges and the closing face that meets the stop. Arrises collect more wear than the flat of a panel, so the number of coats and the sheen belong in the specification rather than being left as a general match to the wall. Existing build-up in the corners of a moulding needs a close photograph. Preparation can improve the line, or it can blunt a detail if it is too coarse. Say if a profile must be preserved. Hinges, locks and numerals to be retained should be listed, together with who removes and refits them. A door that has to keep working during the job cannot be in a wet stack of coats at the only entrance. Identify a sequence that leaves another way through the house, or that returns each leaf to use in turn.

Sash meetings, shutter rebates and paint beside glass

Windows and shutters add edges that a wall schedule never sees. A box sash has meeting rails, staff beads and a cill, and each may carry a different thickness of old coating. Shutters, where they remain, have rebates and hinge edges that only show when the leaf is folded. The brief should state whether those moving parts are included and whether the window must open during the work. Paint against glass needs a clear rule: what is cut in, what is cleaned off, and whether glazing compound is sound enough to paint or is a repair to be assessed first. On a listed building, RBKC explains that protection covers the interior as well as the outside, and that decorative features and joinery can be relevant to consent. Stripping a moulding or altering a shutter profile is therefore a permission question before it is a decorating method. Regular maintenance is a different discussion from a change that affects character. Ask which of the two is being proposed.

Sources: RBKC: listed buildings explained

Cupboard carcasses, shelves and ironmongery left in place

Fitted cupboards are often described as a single item when the work is really a set of surfaces: outer faces, door edges, exposed ends, shelves and the interior if it is included. Each takes a different degree of wear and a different appetite for odour while it dries. An interior that will hold clothes again needs the product's guidance on cure, not a guess. Knobs, hinges and any unpainted timber or stone that the new finish will meet should be photographed and either removed, masked or excluded in writing. End panels seen from a doorway are easy to omit from a verbal request to refresh the cupboard. Mark them. If a door sticks, record that before paint is added to an edge that is already tight. The quotation can then separate decorating from any easing or repair. Send the element count with the photographs so a pair of doors is not later assumed to mean a whole run of wardrobes.

Sash colours and old paint on Notting Hill joinery

Ladbroke villas of the 1830s and 1840s may originally have had their multi-paned windows painted black, and the appraisal notes that this colour is still used on some of those houses. Where the windows in front of you are that early multi-pane pattern, write down the present colour before a lighter frame is sampled. In Pembridge, the appraisal describes vertical sliding one-over-one timber sashes painted black on the houses that passage covers. A joinery list there should say whether those sashes stay black. The Ladbroke Arms is picked out for a different joinery reason: the frontage keeps wide sashes and original stained glass in the transom lights, while the stock brick has been painted. Name the glass and the wide meeting rails so they are masked, and do not treat painted brick as a reason to coat the lights. Where timber on a listed building is currently bare, Historic England warns that painting it is likely to need listed building consent, even if that surface carried paint at some earlier time. Do not coat a bare shutter, cill or bead until that point is confirmed. Older paint on joinery may contain lead. HSE records lead pigments in paints used for homes through to the 1960s, and it says leaded paint must not be overheated with a blow lamp or a gas torch. Burning off a sash is not the way this work reaches the wood.

Sources: Royal Borough of Kensington and Chelsea, Ladbroke Conservation Area Appraisal; Royal Borough of Kensington and Chelsea, Pembridge Conservation Area Appraisal; Historic England, Listed Building Consent (Historic England Advice Note 16); HSE, Construction hazardous substances: Lead

How to ask for a joinery quotation

Count every door, sash, shutter and fitted cupboard, and say whether one face or both are included. Add a close photograph of each moulding and a note of hinges, locks and numerals that must come off and go back. Point out a leaf that is the only way through the house, and any edge that already sticks. If stained glass or a bare historic surface is involved, say so in the same note. Send the count from the contact page. The quotation can then separate decorating from any easing or repair, and from any consent that is still open.

Request a joinery quotation

Joinery the appraisals describe on a particular building

Some streets are specific about the window or the door. Denbigh Terrace has margin-light sashes, hoods and four-panel doors. Lansdowne Crescent's captions mention Georgian panes. Viscount Court is side-hung casements and a six-panel entrance in two leaves, not a sash terrace. The sash guide and the railings guide sit beside this service page. Start with the building if it has a page, and use this page for the way a leaf, a moulding and a face are counted.

Denbigh Terrace sashes and doors

Georgian panes on Lansdowne Crescent

Joinery at Viscount Court

Repainting timber sashes

Questions about Joinery & painted details

What should a request to paint doors, windows or cupboards include?

Count the elements and say whether one face or both are included. For a door, that means panels, moulded edges and the closing face, not only the side you see from the room. For a sash, name the meeting rails, beads and cill if they are in the work, and say whether the window must open while it is coated. Cupboards should be split into outer faces, door edges, end panels, shelves and the interior if you want it. Note fittings you will keep, and any leaf that sticks.

What photographs help a joinery quotation?

Send a straight view of each element and a close view of the moulding, so the thickness of the existing coating can be seen. Include both faces where both are wanted, and open shutters so the hinge edge is visible. List ironmongery, numerals and hinges that must be removed and refitted, and say who will do that. Point out an end panel seen from a doorway, because a verbal request to refresh a cupboard often misses it.

How should preparation be limited on old or listed joinery?

Say if a profile has to be kept, and ask for preparation that follows it rather than softening the detail. If the house is listed, ask whether the proposal is maintenance or a change to a moulding, a shutter or other decorative joinery. The council explains that listed protection reaches inside a building as well as the street front, and that those features can matter to consent. Do not assume a tired profile may be stripped or reshaped. Attach the list entry if you have it.

When can a painted door or a cupboard interior be used again?

Follow the drying and curing guidance for the product specified, rather than a hope that the surface will be ready by evening. A door that is the only way through the house should not sit in several wet coats at once. Identify another route, or a sequence that returns each leaf to use in turn. A cupboard interior that will hold clothes again needs the same product note on cure. The inside of a carcass and the outer face do not always call for the same sheen.

What colour were the multi-paned windows on early Ladbroke villas?

The Ladbroke appraisal says villas of the 1830s and 1840s may originally have had their multi-paned windows painted black, and that this colour continues to be used on some of them. Record the colour that is there now before a different frame colour is sampled. It is a description of those villas, not a rule for every later sash in Notting Hill.

Can old paint on a Notting Hill sash be burned off?

HSE guidance says leaded paint must not be overheated with blow lamps or gas torches. Lead pigments were widely used in household paint until the 1960s, so an old sash is not a surface to burn back to bare wood. If the building is listed, painting a surface that is currently unpainted is also likely to need listed building consent.

Your Notting Hill project

Tell us what
you have in mind.

A room, a whole interior or an exterior scheme: describe the property and the changes you want to make.

Your decorating enquiry

Include the address, surfaces involved and any access requirements.

Read our privacy policy about how we handle your enquiry.